FAQ 9. How can Murco products interface with external systems?
Download the PDF version here.
Murco gas detectors can activate external systems such as shut down, fans, sirens, warning lights, dial out systems, or connect to most BMS, SCADA, or other control systems using one or more outputs.
|
System / Outputs |
Relay Contacts ( Normally Open/ Normally Closed) |
Analogue (Continuous) |
|
|
MGD |
1 Level Controllers | 1 Relay: on alarm 10 Amp at 230V/120V |
- |
| 2 Level Controllers | 2 Relays: low and high alarm 10 Amp at 230V/120V |
- |
|
| 1 Fault Relay: 10 Amp at 230V/120V, available only for 2 Level / for 4 and 6 Sensor Controllers | |||
| Expander Box | Provides one relay per sensor per alarm level, available only for 2 Level / 4 and 6 Sensor Controllers |
- |
|
|
IAM |
IAM Sensor | 2 Relays: on alarm 1 Amp at 24 Vac |
- |
| IAM-C Panel | 2 Relays: on alarm 10 Amp at 230V/120V |
- |
|
|
ST-IAM |
ST-IAM 2 | 2 Relays: low and high alarm 1 Amp at 24 Vac | 0-5V, 0-10V, 4-20mA. Data: RS 485 All the above are present all the time and a mixture of outputs may be used for different purposes. |
| ST-MON | 2 Relays: low and high alarm 1 Amp at 24 Vac | RS 232 with TX, RX, DTR,CTS,DCD RS 485 expansion port Parallel Port for Printer |
|
|
MGS |
MGS | 1 Relay: on alarm 1 Amp at 24 Vac | 0-5V, 0-10V, 1-5V, 2-10V, 4-20mA. |
Download the PDF – FAQ 9. How can Murco products interface with external systems?
