PRV IP66 Vent Pipe
We offer the vent pipe models to monitor weeping from pressure relief valves or similar gas leaks in normal pressure pipes or gas levels in airflows in pipes.
The sensor head is fitted into a threaded gun barrel fitting 1” BSP. It is then wired back to the sensor PCB.
The 1” BSP fitting screws into a tee on the vent pipe 1-2m above the pressure relief valve.
The tee may be drilled (2mm) to ensure any pressurised leakages do not damage the sensor, to ensure gas flow across the sensor face and to allow the introduction of test gas to the sensor.
