In order to monitor the concentration of gas in an area and detect gas leaks a fixed gas detection system is typically installed. A system such as this prevents harmful gases damaging the environment, saves on operational costs and most importantly maximises the safety of staff and the public alike. (more…)
Posts Tagged ‘fixed gas detection’
Continuous Monitoring with Fixed Gas Detection
Wednesday, December 14th, 2011Functions of gas detectors.
Wednesday, November 30th, 2011 Gas detectors can be used to detect a wide variety of gases. Typical gases that need to be monitored include, refrigerants, volatile organic compounds, combustibles and toxic gases. Refrigerants are any gases that are used in cooling systems such as air conditioning units, refrigerators and freezers. Apart from the danger leaking refrigerants pose to the environment they can also result in a loss of revenue and potentially damage to stock and property. (more…)
Keeping check on refrigerant leaks with a fixed gas detection system.
Wednesday, November 30th, 2011 With proper maintenance refrigeration systems should be expected to last twenty years or more before needing to be replaced. However, that doesn’t mean a fixed gas detection system does not need to be in place. It can be easy to overlook a small discrepancy or to miss a loose fitting especially in a large commercial refrigeration facility. It need not be an oversight on the part of maintenance that causes a leak either. (more…)
What our Fixed Gas Detection units offer you
Wednesday, October 26th, 2011 Murco Gas Detector controllers provide the precise technology necessary for a complete solution in any large building where a dedicated fixed gas detection equipment is required. The full range of MGD controllers are listed on Murco’s simple to use website and are available as one, two, four or six sensors – valid with either single or dual level monitoring – and they are designed to be compatible with both the 120 or 230V power supply measurements. (more…)
Simple solutions to simple problems you may encounter with you fixed gas detection unit
Monday, September 12th, 2011 Any Murco unit that you have purchased is fully tested and approved before we deliver it to you. So, if you experience a difficulty; it’s possible that it is due to installation problems, the transport or potential site difficulties (the temperature or humidity of the site is too high, there could be other gases present etc.). (more…)
What is new about a Fixed Gas Detection System?
Monday, August 22nd, 2011 A fixed gas detection system is one that links gas supply systems to simple or advanced quality control systems by means of a hard wire. This fixed connection simply releases a continuous signal which monitors any changes to the atmosphere it has been set up to measure. (more…)
Remote Gas Leak detection
Friday, July 15th, 2011 There are many advantages to using remote gas leak detection systems rather than other methods of gas leak detection. Most companies, warehouses and industrial plants will have some exposure to combustible, toxic or refrigerant gases. It is important to monitor levels of these gases in order to ensure the health and safety of staff, the integrity of the premises and in order to limit costs. Environmental concerns also play a role. Governments across Europe have made it compulsory for companies to take all reasonable steps to prevent gas leaks. This includes the installation of gas leak detection systems. (more…)
Continuous monitoring with Fixed gas detection
Friday, June 24th, 2011 Fixed gas detection systems allow companies to monitor the concentration of gas in an area and to detect gas leaks. These systems can save operational costs, protect the environment and ensure the health and safety of personnel. There are two method of fixed gas detection. There are remote sensors and air sampling systems. Murco specializes in remote sensors due to the higher level of accuracy and the continuous monitoring associated with these systems. (more…)
Gas Detection by Murco
Monday, June 20th, 2011 Gas detection is the procedure of identifying potentially hazardous gas leaks by the means of various sensors. Once these sensors detect the presence of gas, an alarm is triggered, warning nearby people of the danger of being exposed to hazardous gasses. Murco has built a reputation for manufacturing high quality, fit for purpose fixed gas detectors that are compressively priced. We specialise in providing products and solutions for a wide variety of gases and applications, ensuring compliance with all relevant standards and regulations. (more…)
Fixed gas leak detection is made easy – thanks to the MGC controllers.
Wednesday, June 11th, 2008 In any large building that requires a dedicated fixed gas detection solution, the Murco Gas Detector (MGD) controllers offer the exact technology that you need for a comprehensive solution. The MGD controllers listed on Murco’s user friendly website have been made available as one, two, four or six sensors – this is applicable with either single or dual level monitoring – it is also compatible with either the 120 or 230V power supply. For PSU applications, a 12V option can be made available. Some of the advanced elements of this gas detection unit include:
(more…)
